Holden Commodore HSV VE/ VF / HSV King Springs suspension options
$327.00 – $538.00
Time to go low without spending big bucks $$
Make up your own spring combo using the information below. JHP recommends for vehicles above or near 100,000km that you replace your shock absorbers with some Monroe GT sport, this will save you big time on labour because the labour content is the same to replace just springs as to replace shockers & springs. The upside is you car will drive and handle better than your standand Commodore suspension. The King spring & Monroe GT sport combo is similar ride & handling as the HSV GTS, R8 suspension tuning.
Give your vehicle some style with a lowered suspesnion springs, 10-50mm drop with some King Springs from JHP!!
Checkout the table and info below and choose the right spring combo to suit your Commodore or HSV VE or VF Sedan, Wagon , LWB WM-WN Caprice or Ute.
Below the table is a picture to show where the measurements are taken from and if you need help from there please call JHP.
These King Spring options will suit Holden Commodore VE, VF, WM, WN and HSV range without the Magnetic Ride Control (MRC) suspension.
Note: For WM = VE & WN = VF Caprice use sedan.
| Vehicles | VF-V6 | VF-V8 | VE-V6 | VE-V8 | Vehicles | Sedan | Ute | Wagon | |
| Front springs | Rear springs | ||||||||
| KHFL-150 | N/A | N/A | 400mm | 390mm | KHRL-152 | 395mm | 395mm | 380mm | |
| KHFL-150SL | N/A | N/A | 390mm | 380mm | KHRL-152HD | 395mm | 395mm | 380mm | |
| KHFL-150SSL | N/A | N/A | 380mm | 370mm | KHRL-152SL | 380mm | 380mm | 365mm | |
| KHFL-150SSSL | N/A | N/A | 370mm | 360mm | KHRL-152SLHD ***NLA*** | 380mm | 380mm | 365mm | |
| KHFL-151 | 395mm | 385mm | N/A | N/A | KHRL-152SSL | 365mm | 365mm | 350mm | |
| KHFL-151SL | 385mm | 375mm | N/A | N/A | KHRL-152SSLHD ***NLA*** | 365mm | 365mm | 350mm | |
| KHFL-151SSL | 370mm | 365mm | N/A | N/A | KHRL-152SSSL | 350m | 350m | 335m | |
| KHFL-151SSSL | 365mm | 355mm | N/A | N/A | KHRL-152SP4 *** NLA *** | 340mm | 340mm | 325mm |
Notes:
- The front springs are listed as V8 and V6 due to engine weight and the rears are listed as sedan, wagon and ute as that makes the difference in the rear.
- Suspension height chart is based on new vehicle measurement and does not allow for sag in old rubber bushes.
- JHP fitting price includes 4 wheel alignment.
- HD spring options and SP4 springs are now NO Longer Available
King Springs offer a limited lifetime warranty on all springs, click here for more details
| Weight | 17 kg |
|---|---|
| Dimensions | 38 × 35 × 20 cm |
| Vehicle Model | VE Sedan, VE Wagon, VE Ute, VF Sedan, VF Wagon, VF Ute |
| fitted at jhp | No |
| Front Spring Options | Rears only, KHFL-150, KHFL-150SL, KHFL-150SSL, KHFL-150SSSL, KHFL-151, KHFL-151SL, KHFL-151SSL, KHFL-151SSSL |
| Rear Spring Options | Fronts only, KHRL-152, KHRL -152HD, KHRL-152SL, KHRL-152SLHD, KHRL-152SSL, KHRL-152SSLHD, KHRL-152SSSL, KHRL-152SP4 |
